* This aggressive camshaft requires high lift and higher load valve springs, performance pushrods and lifters.

* High flow air cleaner and stepped exhaust pipes highly recommended.

* FEULING also recommends matching this cam with our RACE SERIES oiling system #FE-7097 or FE-7099.

* High lift High Load valve springs are required, Part # SS900-0958

* Heavy duty pushrods are highly recommended.

* RPM range 2,250 – 6,250. Grind: 508

* Valve Lift Open Close Duration @ 50 Lobe Centerline

* Intake .508 20.5 BTDC 37 ABDC 237 .180 98.5

* Exhaust .511 44 BBDC 17.5 ATDC 241.5 .146 103.25

* Overlap: 38

* Good cam for a SE Stage 3 Kit.

*“On Line Shopping Only

The post Feuling 508 Reaper Chain Drive Camshaft. Fits Milwaukee-Eight 2017up. appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Fits Water Cooled Touring Models 2017up & All Centre Cooled Touring Models 2024up

Features & Benefits:-

FEULING OE+ stock replacement billet oil pumps deliver increased oil pressure and return scavenge volumes over the factory oil pumps by using larger gerotors and properly sized passages. They will also increase the oil pressure by using a precision machined pressure relief valve which is seated and sealed to a minimum of 30 psi with full pop offat 55-65 psi.

* For OEM or Feuling OE+ Camplate # FE-8037

* Billet 6061 aluminum

* Increases oil pressure

* Larger 2in. Pressure gerotors

* Larger 2.25in. Scavenge gerotors

* Stock replacement

Made in the U.S.A.

*“On Line Shopping Only

The post Feuling OE+ Oil Pump. Fits Touring 2017up with Water Cooled Engine & Touring 2024up appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Fits Water Cooled Touring Models 2017up & All Centre Cooled Touring Models 2024up

* Does NOT Fit VVT Models

Features & Benefits:-

* Billet 6061 aluminum high volume oil pump

* Hard Annodised 7075 Billet Aluminium camplate

* HP+ Hydraulic roller lifters and cam installation kit.

* Quieter and smoother engine operation

* Increase oil pressure, scavenge volume and engine oil flow

* 30% more pressure gear volume over stock

* 53% more scavenge gear volume over stock

* 42% more scavenge volume with port sizing, matched passages and holes to the engine case

* 46% more oil volume to the crankshaft and connecting rod bearing

* 15-25 degree cooler engine temperatures

* 15-30 degree cooler oil temperatures

* 10-30 more PSI of oil pressure

* Reduces wet sumping, blow by and oily air cleaners

* Magnets in oil pump to help protect gears and pressure relief valve

NOTE: FEULING test results show a 50% reduction of engine sump oil level.

Tech Tips:-

* Gear drive cams require Block-off Plate part # FE-8016

* Replaces OEM # 62400264

*“On Line Shopping Only

The post Feuling HP+ Oil System. Fits Touring 2017up with Water Cooled Engine & Touring 2024up appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Developed due to billet lifter cuffs being found to cause debris and harmonics due to rubbing on the lifter flats.

* Increased clearances for larger lift camshafts. Able to use with up to our 618 camshaft without modification. Factory allows up to ~0.550in. lift.

* Recommended to be used with FEULING lifters as they fit the tightest, however other branded lifters are compatable.

* Includes ARP fasteners and wedge lock washers.

* Made in USA

Suggested Additonal Purchase:-

Tappet Cover Gaskets # JGI-25700362 or JCG-C10302

*“On Line Shopping Only

The post Feuling Lifter Cuffs. Fits Milwaukee-Eight 2017up appeared first on Birds Bitz Motorcycle Parts & Accessories.

A SHOW polish with corrosion-resistant finish

MADE IN THE U.S.A.

Comes with:

Rear Fender Bracket

Rear Fender Bracket

Battery Box Side Covers

Shifter Linkage (FINE THREAD)

Shifter Arm W/ Washer and Nut

Rear Brake Master Cylinder

Rear Brake Master Cylinder

Rear Brake Master Cylinder (FINE THREAD)

Dash

Footpeg brackets W/Washers

Belt Guards

5/16 Nut

5/16 Washer

Ultra Torque Lube

*“On Line Shopping Only

The post Feuling ARP 12 Point Chassis Fastener Show Bike Kit. Fits Softail 2018up. appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Fits Oil Cooled Models.

* Does NOT fit Any Tourer 2024up (Centre Cooled, These use a Water Cooled System)

Features & Benefits:-

FEULING OE+ stock replacement billet oil pumps deliver increased oil pressure and return scavenge volumes over the factory oil pumps by using larger gerotors and properly sized passages. They will also increase the oil pressure by using a precision machined pressure relief valve which is seated and sealed to a minimum of 30 psi with full pop off at 55-65 psi.

* For OEM or Feuling OE+ Camplate # FE-8037

* Billet 6061 aluminum

* Increases oil pressure

* Larger 2in. Pressure gerotors

* Larger 2.25in. Scavenge gerotors

* Stock replacement

Made in the U.S.A.

*“On Line Shopping Only

The post Feuling OE+ Oil Pump. Fits Milwaukee-Eight 2017up with Oil Cooled Engine appeared first on Birds Bitz Motorcycle Parts & Accessories.

*Replaces the first, outer most spring in OEM pack #40384-83, #40267-85, #40384-91, #40356-06, #40356-07. Made in USA

*Direct upgradedreplacement for ’85-’99 Evo, ’99-’11 Dyna/Softail, ’99-’10 Touring, ’99-’09 CVO.

NOTE: Feuling spring is not a fix for excessively worn and or damaged compensators

*“On Line Shopping Only

The post Feuling Performance Compensator Replacement Spring. Fits Softail & Dyna 1985-2011 & Touring 1985-2010 appeared first on Birds Bitz Motorcycle Parts & Accessories.

*“On Line Shopping Only

The post Feuling Replacement Acrylic Insert. Fits Feuling BA Air Filters. appeared first on Birds Bitz Motorcycle Parts & Accessories.

The 487 Reaper CHOP is a great all-around camshaft and Feulings go to for 4 1/2 stroke 114 – 117 looking for an agressive bolt-in. The 487 has that nasty CHOP idle sound while producing a wide powerband that the Feuling cams are known for. Responds very well to increased bore and or compression, exhaust system and air cleaner.

Suggested Additional Purchase:

* S&S 55mm Manifold # SS160-0241

* S&S Tappet Cuffs # SS330-0655

* S&S Cam Chain Tensioner SS330-0737

* S&S Oil Control Valve SS310-1150

* Feuling Crank Sprocket FE-1091

Tech Tips:-

* Use of performance valve-springs is not required but may result in a quieter, smoother running valve-train.

* Check Crankshaft run-out using Feuling Tool # FE-9014.

* S&S Crankshafts are available where run-out exceeds Specification.

Proudly Made in the USA by S&S Cycle !

*“On Line Shopping Only

The post Feuling Feuling 487 Performance Cam Kit. Fits Milwaukee-Eight 2017up appeared first on Birds Bitz Motorcycle Parts & Accessories.

The 487 Reaper CHOP is a great all-around camshaft and Feulings go to for 4 1/2 stroke 114 – 117 looking for an agressive bolt-in. The 487 has that nasty CHOP idle sound while producing a wide powerband that the Feuling cams are known for. Responds very well to increased bore and or compression, exhaust system and aircleaner.

Suggested Additional Purchase:

* S&S 55mm Manifold # SS160-0241

* S&S Tappet Cuffs # SS330-0655

* S&S Cam Chain Tensioner SS330-0737

* S&S Oil Control Valve SS310-1150

* Feuling Crank Sprocket FE-1091

Tech Tips:-

* Use of performance valve-springs is not required but may result in a quieter, smoother running valve-train.

* Check Crankshaft run-out using Feuling Tool # FE-9014.

* S&S Crankshafts are available where run-out exceeds Specification.

Proudly Made in the USA by S&S Cycle !

*“On Line Shopping Only

The post Feuling Feuling 487 Performance Cam Kit – Black Pushrods. Fits Milwaukee-Eight 2017up appeared first on Birds Bitz Motorcycle Parts & Accessories.