* Optimal Hand Position: Engineered for better control and ride comfort

* Heated Grip Compatibility: Designed to work seamlessly with heated grips

* Laser-etched Alignment Dashes: Makes setup, and adjusting the bars to your ideal riding position easier

* Compatibility: Pre-slotted for all year/model fitments for both Throttle By Wire (TBW) and regular cable throttle

* DIMENSIONS: Width=29in., Height=3.25in. Pullback=2.5in.

*“On Line Shopping Only

The post Kraus Moto 1in. KR Low Handlebar – Black appeared first on Birds Bitz Motorcycle Parts & Accessories.

Fitment:

SDC Dagger Pullback Plates are designed and engineered for universal fitment. Modifications may be required depending on the application. Not compatible with baggers with batwing fairings or VRods.

*“On Line Shopping Only

The post Kraus Moto SDC Dagger Pullback Plate – Black. Fits Softail 2018up appeared first on Birds Bitz Motorcycle Parts & Accessories.

Your top tree clamp is an essential part of a performance front end setup. The Wolf One Top Clamp has been engineered and designed with a broader cross section offering increased axial strength over the stock Harley Tree. The increased surface area of our wide body fork clamps offer positive hold of your forks giving you peace of mind that your triple tree setup will absorb the abuse of hard use. The Wolf One Top Clamp is intended for Road Glides and allows you to remove your stock plastic Nacelle to have a clean open look of an inverted front end.

* Requires the purchase of # KRA-ST-STT-54 Steering Lock

Suggested Additional Purchase

Risers i.e Part # KRA-UN-ISO-50-A

Riser Clamp Part # KRA-UN-IN-12-A

Relocation Bracket Part # KRA-UN-IN-031-A

Gauge Housing Part # KRA-ST-IN-03-A

Bars i.e. Part # TS-TSC-2700-1

Proudly made in the USA by Kraus Motor Co.!

*“On Line Shopping Only

The post Kraus Moto Wolf One Billet Bagger Top Clamp – Black. Fits Road Glide 2015-2023 appeared first on Birds Bitz Motorcycle Parts & Accessories.

* This mount will allow fitment of commonly found 108mm style radial calipers and will allow up to a 310mm Rotor Size. Caliper Part # KRA-UN-BR-18FL-H-1 or KRA-UN-BR-18SL-S

Tech Tips:-

* Requires a new rear brake line

Proudly made in the USA by Kraus Motor Co.!

*“On Line Shopping Only

The post Kraus Moto Rear Radial Caliper Mount – Black. Fits Touring 2008up. appeared first on Birds Bitz Motorcycle Parts & Accessories.

The Kraus Cartridge Seal Head Driver Tool tool is necessary for Ohlins fork rebuilding and cartridge installation for Ohlins FKS 508 cartridges. This tool uses a 3/8in. drive end and provides easier assembly and disassembly when servicing specific Ohlins forks. Designed and engineered to be used with the KRT Forks (FF52X), Dynamoto Forks (FGRT 205s), and FKS 508s.

Proudly made in the USA by Kraus Motor Co.!

*“On Line Shopping Only

The post Kraus Moto Kraus Ohlins Catridge Seal Head Driver Tool. appeared first on Birds Bitz Motorcycle Parts & Accessories.

The Kraus Cartridge Pull Rod Tool will help in installation of specific Ohlins cartridges and forks. This tool comes with M8x1.25, M10x1.25, and M12x1.25 thread sizes allowing it to be used in other applications as well. Designed and engineered to be used with Kraus KRT Forks (FF52X), Dynamoto Forks (FGRT 205s), Ohlins FKS 212, FKS 221, FKS 228, and FKS 508 model forks.

Proudly made in the USA by Kraus Motor Co.!

*“On Line Shopping Only

The post Kraus Moto Kraus Ohlins Catridge Pull Rod Tool. appeared first on Birds Bitz Motorcycle Parts & Accessories.

* This tool has an eight sided octagon shape measured 50mm side to side.

* Designed and engineered to be used with the Ohlins FKS 508 model cartridge.

Proudly made in the USA by Kraus Motor Co.!

*“On Line Shopping Only

The post Kraus Moto Kraus Ohlins Catridge Fork Cap Tool. Fits Softail Fatbob 2018up, Low Rider S 2020up & Low Rider ST 2022up appeared first on Birds Bitz Motorcycle Parts & Accessories.

* This tool has an eight sided octagon shape measured 41mm side to side.

* Designed and engineered to be used with Ohlins FKS 212, FKS 221 and FKS 228 model cartridges.

Proudly made in the USA by Kraus Motor Co.!

*“On Line Shopping Only

The post Kraus Moto Kraus Ohlins Catridge Fork Cap Tool. Fits Dyna 2006-2017, Softail 2018up & Touring 2017up with 49mm Fork Tubes. appeared first on Birds Bitz Motorcycle Parts & Accessories.

Your top tree clamp is an essential part of a performance front end setup. The Wolf One Top Clamp has been engineered and designed with a broader cross section offering increased axial strength over the stock Harley Tree. The increased surface area of our wide body fork clamps offer positive hold of your forks giving you peace of mind that your triple tree setup will absorb the abuse of hard use. The Wolf One Top Clamp is intended for Road Glides and allows you to remove your stock plastic Nacelle to have a clean open look of an inverted front end.

* Requires the purchase of # KRA-ST-STT-54

Suggested Additional Purchase

Risers i.e KRA-UN-ISO-50-A

Bars i.e. Part # TS-TSC-2804-1

Proudly made in the USA by Kraus Motor Co.!

Tech Tips:-

Does NOT fit CVO Road Glide Models

*“On Line Shopping Only

The post Kraus Moto Wolf One Billet Bagger Top Clamp – Black. Fits Road Glide 2024up appeared first on Birds Bitz Motorcycle Parts & Accessories.

The combination of performance, functionality and aggressive aesthetics makes the Bully top triple tree one of the primary upgrades for your Harley Lowrider S or ST. Enhance the styling of your Harley Softail with the anodized billet look that Kraus has become known for. Edgy tooling lines and smooth finishes unite with American-made precision manufacturing to bring your bike into the new era of high-class aesthetic styling. Improved cross-sectional rigidity and enhanced clamping forces are essential functional foundations of a performance top tree. The Bully checks all the boxes.

Proudly made in the USA by Kraus Motor Co.!

*“On Line Shopping Only

The post Kraus Moto Bully Billet Top Clamp – Black. Fits Low Rider S 2020up. appeared first on Birds Bitz Motorcycle Parts & Accessories.