* * Precision Machined Sprockets for accurate cam timing, Helps to eliminate the timing variance (up to 4 degrees) that is associated with the loose fitting factory sprockets.

* A VERY underrated component in quality engine builds

* High quality bearing steel for superior strength

* Replaces OEM # 25673-06

Tech Tips:-

* Due to variations in pinion shafts, S&S have gone a little smaller on the I.D.

Using a soft mallet to install is pretty common, after the first install and removal of the sprocket after checking sprocket alignment the 1091 will go on cleaner for final assembly as the sprocket is now somewhat matched to the crank.

*“On Line Shopping Only

The post S&S 17T Outer Crank Sprocket. Fits Twin Cam 2007-2017 & Milwaukee-Eight 2017up appeared first on Birds Bitz Motorcycle Parts & Accessories.

* +/-4 Degree Cam Timing Option

* Advancing to +4 degrees boosts low-end torque, while retarding to -4 degrees lowers cylinder compression pressure

* PrecisionCNC machined for accurate cam timing

* High quality bearing quality billet steel

* Exceptional tooth wear resistance to dramatically extend sprocket life

* Direct replacement

* Made in the USA

*“On Line Shopping Only

The post S&S Adjustable Timing Outer Crank Sprocket – 17 Tooth. Fits Twin Cam 2007-2017 & Milwaukee-Eight 2017up appeared first on Birds Bitz Motorcycle Parts & Accessories.

* 117ci to 132ci Big Bore Kit (4.320in. Bore)

* Fits Oil Cooled Models.

Oil Pump/Cam Plate:-

* NOTE: Will NOT fit SOFTAIL

* Chain Drive Cam & Forged Pistons with 11.1 Compression Ratio

* Wrinkle Black with Highlighted Cylinder Fins.

* Bolt-On Kit — No Case Machining Required.

* Includes Oil Pump & Cam Plate.

* Includes Quickee Pushrods with Chrome Pushrod Tubes

* Includes S&S Premium Tappets

* Includes Tappet Cuffs

* Includes S&S HPT542 Chain Drive Cam

* Includes S&S Valve Springs

* Includes S&S Cam Chain Tensioner

Tech Tips:-

* Must Purchase S&S M8 Head Bolts # SS900-1006 or ARP Head Bolt Kit FE-3007.

* Use Care during assembly to avoid damage to Cylinder Spigots.

* Ring gap & Piston to Cylinder Clearance should be checked.

* Rev Limit should be set at 3500 rpm for Initial Run In Period.

* Re-Calibration of Ignition Timing & Fuel Mixture is required.

People who Buy this Product also Purchase:-

* Hi-Strength Rocker Stud & Nut Kit # SS900-1013 or FE-3037.

* ARP Chrome Moly Hi-Performance Cylinder Stud Kit SS310-1204 or FE-3027.

Proudly Made in the USA by S&S Cycle !

*“On Line Shopping Only

The post S&S Power Pack – 132ci Big Bore Kit with Chain Drive HPT542 Camshaft, Highlighted Fins & Chrome Pushrod Tubes. Fits Gen 2 Milwaukee-Eight Touring 2024up appeared first on Birds Bitz Motorcycle Parts & Accessories.

* 117ci to 132ci Big Bore Kit (4.320in. Bore)

* Fits Oil Cooled Models.

* NOTE: Will not fit FLH’24up, They use Water Cooled Cam Plate & Oil Pump

* Chain Drive Cam & Forged Pistons with 11.1 Compression Ratio

* Wrinkle Black with Highlighted Cylinder Fins.

* Bolt-On Kit — No Case Machining Required.

* Includes Oil Pump & Cam Plate.

* Includes Quickee Pushrods with Black Pushrod Tubes

* Includes S&S Premium Tappets

* Includes Tappet Cuffs

* Includes S&S HPT542 Chain Drive Cam

* Includes S&S Valve Springs

* Includes S&S Cam Chain Tensioner

Tech Tips:-

* Must Purchase S&S M8 Head Bolts # SS900-1006 or ARP Head Bolt Kit FE-3007.

* Use Care during assembly to avoid damage to Cylinder Spigots.

* Ring gap & Piston to Cylinder Clearance should be checked.

* Rev Limit should be set at 3500 rpm for Initial Run In Period.

* Re-Calibration of Ignition Timing & Fuel Mixture is required.

People who Buy this Product also Purchase:-

* Hi-Strength Rocker Stud & Nut Kit # SS900-1013 or FE-3037.

* ARP Chrome Moly Hi-Performance Cylinder Stud Kit SS310-1204 or FE-3027.

Proudly Made in the USA by S&S Cycle !

*“On Line Shopping Only

The post S&S Power Pack – 132ci Big Bore Kit with Chain Drive HPT542 Camshaft, Highlighted Fins & Black Pushrod Tubes. Fits Gen 2 Milwaukee-Eight Softail 2025up with Oil Cooled Engine appeared first on Birds Bitz Motorcycle Parts & Accessories.

* 117ci to 132ci Big Bore Kit (4.320in. Bore)

* Fits Oil Cooled Models.

* NOTE: Will not fit FLH’24up, They use Water Cooled Cam Plate & Oil Pump

* Chain Drive Cam & Forged Pistons with 11.1 Compression Ratio

* Wrinkle Black with Highlighted Cylinder Fins.

* Bolt-On Kit — No Case Machining Required.

* Includes Oil Pump & Cam Plate.

* Includes Quickee Pushrods with Chrome Pushrod Tubes

* Includes S&S Premium Tappets

* Includes Tappet Cuffs

* Includes S&S HPT542 Chain Drive Cam

* Includes S&S Valve Springs

* Includes S&S Cam Chain Tensioner

Tech Tips:-

* Must Purchase S&S M8 Head Bolts # SS900-1006 or ARP Head Bolt Kit FE-3007.

* Use Care during assembly to avoid damage to Cylinder Spigots.

* Ring gap & Piston to Cylinder Clearance should be checked.

* Rev Limit should be set at 3500 rpm for Initial Run In Period.

* Re-Calibration of Ignition Timing & Fuel Mixture is required.

People who Buy this Product also Purchase:-

* Hi-Strength Rocker Stud & Nut Kit # SS900-1013 or FE-3037.

* ARP Chrome Moly Hi-Performance Cylinder Stud Kit SS310-1204 or FE-3027.

Proudly Made in the USA by S&S Cycle !

*“On Line Shopping Only

The post S&S Power Pack – 132ci Big Bore Kit with Chain Drive HPT542 Camshaft, Highlighted Fins & Chrome Pushrod Tubes. Fits Gen 2 Milwaukee-Eight Softail 2025up with Oil Cooled Engine appeared first on Birds Bitz Motorcycle Parts & Accessories.

Fitment:

Milwaukee-Eight: All 2017up

Twin Cam: Direct fit for Softail 2012-2017, Dyna 2012-2017 & Touring 2011-2016

& All earlier models with SE style compensator upgrade

* Replaces the first, outer most spring in OEM pack #83936-09A

* Made in the USA

Tech Tips:-

Does not work with aftermarket SE Style Compensator Sprocket Kits (i.e # BAI-D26-0145K or Drag # 1120-0404. The Compensator Ramp of the Aftermarket kits is much thicker than the HD unit for additional strength.)

*“On Line Shopping Only

The post S&S Performance Compensator Replacement Spring. Fits Softail 2012up, Touring 2011up & Dyna 2012-2017 appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Stainless steel wear-liner inserts eliminate the notching issues inherent to the stock basket—providing enhanced clutch modulation and a smoother lever feel (patent pending)

* Integrated wear liners offer far greater durability than bare aluminum (stock) or hard-anodized alternatives

* Integrated carbon steel threaded inserts for increased strength and long-term reliability

*Compatible with all clutch packs that fit the stock basket—including Rekluse® TorqDrive®

* Improves alignment of the primary sprockets and primary chain upon installation

* Precision CNC-machined from solid billet aluminum

* Drag-strip tested & proven

* Made in the U.S.A.

Tech Tips:-

* Requires removing your stock ring gear/primary gear and bolting on to the new S&S basket.

* Bearing NOT included – Purchase # ABR-5207-2RS for 2007-2010 or # EVO-1014-0500 for 2011-2017

* All hardware and instructions are included.

*“On Line Shopping Only

The post S&S Heavy Duty Billet Clutch Basket. Fits 6Spd Twin Cam 2006-2017 appeared first on Birds Bitz Motorcycle Parts & Accessories.

S&S Cycle – Real American camshaft expertise with in-house design, grinding, and validation.

Key Specifications

* Lift: .542in.

* Intake Duration: 223°

* Exhaust Duration: 259°

* Intake Closes: 30°

* RPM Range: Strong pull from 2000 – 6200 RPM

* Compression: Works great up to 11.7:1

* Bolt-in for Gen 2 M8 engines with oval port heads (117 & 121 non-VVT)

* Compatible with Gen 1 M8 engines using S&S .605in. lift springs (performs excellently with a mild port job)

* Real-World Performance

* Outstanding throttle response

* Aggressive yet streetable lope at idle

Suggested Additional Purchase:

* Install kit # SS330-0619 Or Bearing # FE-2080 & Gasket Kit # CG-C10302

Tech Tips:-

* Check Crankshaft run-out using Feuling Tool # FE-9014.

* S&S Crankshafts are available where run-out exceeds Specification.

Proudly Made in the USA by S&S Cycle !

*“On Line Shopping Only

The post S&S HPT542 Chain Drive Camshaft. Fits Gen 2 Milwaukee-Eight Engines. Street Glide, Road Glide & CVO Road Glide ST 2024up, Touring 2025up & Softail 2025up appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Precision Machined Sprockets for accurate cam timing

* High quality bearing steel for superior strength

* Delivers exceptional tooth wear resistance without brittleness,dramatically extending sprocket life under high load and shock conditions.

* Smoother chain engagement and reduced tooth wear

* Direct replacement with Premium style with performance machining

Suggested Additional Purchase:

SS330-0737 (Cam Chain Tensioner Kit)

SS500-1910 (12 Point Cam & Pinion Bolt Fastener Kit)

Replaces OEM Numbers:

Cam Chain OEM # 25675-06

17T Crank Sprocket OEM # 25673-06

34T Cam Sprocket OEM # 25400103

Shim Kit OEM # 25729-06, 25731-06, 25734-06, 25736-06, 25737-06 & 25738-06

* Replaces OEM Kit # 25400257

Proudly Made in the USA by S&S Cycle !

*“On Line Shopping Only

The post S&S Camshaft Chain Drive Kit – Includes Chain, Sprockets, and Shims. Fits Milwaukee-Eight 2017up appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Precision Machined Sprockets for accurate cam timing

* High quality bearing steel for superior strength

* Delivers exceptional tooth wear resistance without brittleness,dramatically extending sprocket life under high load and shock conditions.

* Smoother chain engagement and reduced tooth wear

* Direct replacement with Premium style with performance machining

Suggested Additional Purchase:

SS330-0518 (Cam Chain Tensioner Kit)

SS500-1910 (12 Point Cam & Pinion Bolt Fastener Kit)

Replaces OEM Numbers:

Outer Cam Chain OEM # 25675-06

Inner Cam Chain OEM # 25683-06

17T Crank Sprocket OEM # 25673-06

34T Cam Sprocket OEM # 25728-06

Shim Kit OEM # 25729-06, 25731-06, 25734-06, 25736-06, 25737-06 & 25738-06

* Replaces OEM # 25585-06

Proudly Made in the USA by S&S Cycle !

*“On Line Shopping Only

The post S&S Camshaft Chain Drive Kit – Includes Chain, Sprockets, and Shims. Fits Dyna 2006 & Twin Cam 2007-2017 appeared first on Birds Bitz Motorcycle Parts & Accessories.