* A race bred, classically styled pipe designed to compliment the look of your Harley perfectly, while enhancing the riding experience.

* TIG welded by hand with precision out of Two Brothers’ Santa Ana, CA based headquarters.

* Uses the decades old and race proven design of the classic reverse cone megaphone.

* Race-inspired, 100% stainless steel construction comes with welded end caps and our exclusive spiral wound stainless steel perforated inner core for a completely new look and old-school sound.

* Comes standard with stepped headers for immediate power gain.

* Heat shields included (not pictured on bike).

* Accepts stock O2 sensor, as well as aftermarket wide band (18mm)

Tech Tips:-

* Does not fit 240 tyre models

* Model with Saddlebags (i.e. Heritage, Sport Glide, Low Rider ST) require purchase of Saddlebag relocation bracket # TBR-005-496-SGB

Proudly Made in the USA by Two Brothers Racing !

*“On Line Shopping Only

The post TWO BROTHERS RACING EXHAUST Megaphone Gen II 2-into-1 Exhaust – Black. Fits Softail 2018up with Non-240 Rear Tyre appeared first on Birds Bitz Motorcycle Parts & Accessories.

*“On Line Shopping Only

The post TWO BROTHERS RACING EXHAUST Replacement Spring. TBR Exhaust Systems appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Carbon fiber end cap.

* All TIG welds done by hand.

* High-temp SS wool and packing material.

* Available in ceramic black.

* MADE in the USA!

Tech Tips:-

Suggested additional purchase of K&N High Flow Element # KN-HA-2513

*“On Line Shopping Only

The post TWO BROTHERS RACING EXHAUST Comp-S Slip-On Muffler – Black with Carbon Fiber End Cap. Fits Honda CMX / Rebel 500cc 2017-2024 appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Carbon fiber end cap.

* All TIG welds done by hand.

* High-temp SS wool and packing material.

* Available in brushed stainless.

* Up-Swept design without interfering the passenger

* 50 State Compliant (Cat retained)

* Clearance for longer shocks

* Tunable for sound with purchase of Part # TBR-005-DB-CR

* MADE in the USA!

Suggested additional purchase of K&N High Flow Element # KN-HA-1121

Tech Tips:-

Doesnt fit 2023up CMX1100 Tour Model (With Saddlebags)

*“On Line Shopping Only

The post TWO BROTHERS RACING EXHAUST Comp-S Slip-On Muffler – Stainless with Carbon Fiber End Cap. Fits Honda CMX / Rebel 1100cc 2021up. appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Carbon fiber end cap

* All TIG welds done by hand

* High-temp SS wool and packing material

* Available in ceramic black

* Up-Swept design without interfering the passenger

* 50 State Compliant (Cat retained)

* Clearance for longer shocks

* Tunable for sound with purchase of Part # TBR-005-DB-CR

* MADE in the USA!

Suggested additional purchase of K&N High Flow Element # KN-HA-1121

Tech Tips:-

Doesnt fit 2023up CMX1100 Tour Model (With Saddlebags)

*“On Line Shopping Only

The post TWO BROTHERS RACING EXHAUST Comp-S Slip-On Muffler – Black with Carbon Fiber End Cap. Fits Honda CMX / Rebel 1100cc 2021up. appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Designed for max torque and increased horsepower.

* Available in ceramic black.

* Includes stainless steel heat shield.

* All TIG welds done by hand.

* Accepts stock O2 sensor.

* USA Made!

Tech Tips:-

Suggested additional purchase of K&N High Flow Element # KN-YA-9514

*“On Line Shopping Only

The post TWO BROTHERS RACING EXHAUST Comp-S 2-into-1 Exhaust – Black with Carbon Fiber End Cap. Fits Yamaha Bolt 2013up. appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Dyno tuned for maximum performance.

* Swept-up muffler for enhanced ground clearance.

* Carbon fiber end cap.

* Mandrel bent stainless steel tubing.

* All TIG welds done by hand.

* High-temp SS wool and packing material.

* Fits with forward and mid controls.

* Available in ceramic black.

* Accepts stock O2 sensor, as well as aftermarket wide band (18mm) sensors.

* Simple, clean, and functional heat shields included.

* Drops weight.

Tech Tips:-

* On models fitted with OEM Forward Controls the front header should be tucked in close to the frame well clear of the brake pedal & Brake rod attachment point

* Rotate the rear header outwards (front header Inwards) so the collector of the muffler angles outwards

* Installing the muffler loosely first will help get the proper alignment

* Be conscious of not inserting the header pipes too far into the muffler – particularly on the rear

* Keep the front and rear headers & muffler loose until fitted.

* Tighten the exhaust using the Industry standard tightening sequence.

* Fit the springs last

Proudly Made in the USA!

Tech Tip:

========

This system requires keeping the oem bracket.

(If already fitted with aftermarket exhaust that removed it /

requires finding another!)

*“On Line Shopping Only

The post TWO BROTHERS RACING EXHAUST Comp-S 2-into-1 Exhaust – Black with Carbon Fiber End Cap. Fits Sportster 2014-2021 appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Designed to live up to Two Brothers’ unparalleled sound and performance.

* A race bred, classically styled pipe designed to compliment the look of your Harley perfectly, while enhancing the riding experience.

* TIG welded by hand with precision out of Two Brothers’ Santa Ana, CA based headquarters.

* Uses the decades old and race proven design of the classic reverse cone megaphone.

* Race-inspired, 100% stainless steel construction comes with welded end caps and our exclusive spiral-wound stainless steel perforated inner core for a completely new look and old-school sound.

* Comes standard with stepped headers for immediate power gain.

* Accepts stock O2 sensor, as well as aftermarket wide band (18mm) sensors.

* Fits with forward and mid controls.

Tech Tips:-

* On models fitted with OEM Forward Controls the front header should be tucked in close to the frame well clear of the brake pedal & Brake rod attachment point

* Rotate the rear header outwards (front header Inwards) so the collector of the muffler angles outwards

* Installing the muffler loosely first will help get the proper alignment

* Be conscious of not inserting the header pipes too far into the muffler – particularly on the rear

* Keep the front and rear headers & muffler loose until fitted.

* Tighten the exhaust using the Industry standard tightening sequence.

* Fit the springs last

ProudlyMade in the USA!

Tech Tip:

========

This system requires keeping the oem bracket.

(If already fitted with aftermarket exhaust that removed it /

requires finding another!)

*“On Line Shopping Only

The post TWO BROTHERS RACING EXHAUST Megaphone Gen II 2-into-1 Exhaust – Black. Fits Sportster 2014-2021 appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Dyno tuned for maximum performance.

* Swept-up muffler for enhanced ground clearance.

* Carbon fiber end cap.

* Mandrel bent stainless steel tubing.

* All TIG welds done by hand.

* High-temp SS wool and packing material.

* Fits with forward and mid controls.

* Available in brush stainless steel finish

* Accepts stock O2 sensor, as well as aftermarket wide band (18mm) sensors.

* Simple, clean, and functional heat shields included.

* Drops weight.

Tech Tips:-

* On models fitted with OEM Forward Controls the front header should be tucked in close to the frame well clear of the brake pedal & Brake rod attachment point

* Rotate the rear header outwards (front header Inwards) so the collector of the muffler angles outwards

* Installing the muffler loosely first will help get the proper alignment

* Be conscious of not inserting the header pipes too far into the muffler – particularly on the rear

* Keep the front and rear headers & muffler loose until fitted.

* Tighten the exhaust using the Industry standard tightening sequence.

* Fit the springs last

Proudly Made in the USA!

Tech Tip:

========

This system requires keeping the oem bracket.

(If already fitted with aftermarket exhaust that removed it /

requires finding another!)

*“On Line Shopping Only

The post TWO BROTHERS RACING EXHAUST Comp-S 2-into-1 Exhaust – Stainless Steel with Carbon Fiber End Cap. Fits Sportster 2014-2021 appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Designed to live up to Two Brothers’ unparalleled sound and performance.

* A race bred, classically styled pipe designed to compliment the look of your Harley perfectly, while enhancing the riding experience.

* TIG welded by hand with precision out of Two Brothers’ Santa Ana, CA based headquarters.

* Uses the decades old and race proven design of the classic reverse cone megaphone.

* Race-inspired, 100% stainless steel construction comes with welded endcaps and our exclusive spiral-wound stainless steel perforated inner core for a completely new look and old-school sound.

* Comes standard with stepped headers for immediate power gain.

Tech Tips:-

* On models fitted with OEM Forward Controls the front header should be tucked in close to the frame well clear of the brake pedal & Brake rod attachment point

* Rotate the rear header outwards (front header Inwards) so the collector of the muffler angles outwards

* Installing the muffler loosely first will help get the proper alignment

* Be conscious of not inserting the header pipes too far into the muffler – particularly on the rear

* Keep the front and rear headers & muffler loose until fitted.

* Tighten the exhaust using the Industry standard tightening sequence.

* Fit the springs last

Proudly Made in the USA!

*“On Line Shopping Only

The post TWO BROTHERS RACING EXHAUST Megaphone Gen II 2-into-1 Exhaust – Stainless Steel. Fits Sportster 1986-2003. appeared first on Birds Bitz Motorcycle Parts & Accessories.