* This aggressive camshaft requires high lift and higher load valve springs, performance pushrods and lifters.

* High flow air cleaner and stepped exhaust pipes highly recommended.

* FEULING also recommends matching this cam with our RACE SERIES oiling system #FE-7097 or FE-7099.

* High lift High Load valve springs are required, Part # SS900-0958

* Heavy duty pushrods are highly recommended.

* RPM range 2,250 – 6,250. Grind: 508

* Valve Lift Open Close Duration @ 50 Lobe Centerline

* Intake .508 20.5 BTDC 37 ABDC 237 .180 98.5

* Exhaust .511 44 BBDC 17.5 ATDC 241.5 .146 103.25

* Overlap: 38

* Good cam for a SE Stage 3 Kit.

*“On Line Shopping Only

The post Feuling 508 Reaper Chain Drive Camshaft. Fits Milwaukee-Eight 2017up. appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Fits Water Cooled Touring Models 2017up & All Centre Cooled Touring Models 2024up

* Does NOT Fit VVT Models

Features & Benefits:-

* Billet 6061 aluminum high volume oil pump

* Hard Annodised 7075 Billet Aluminium camplate

* HP+ Hydraulic roller lifters and cam installation kit.

* Quieter and smoother engine operation

* Increase oil pressure, scavenge volume and engine oil flow

* 30% more pressure gear volume over stock

* 53% more scavenge gear volume over stock

* 42% more scavenge volume with port sizing, matched passages and holes to the engine case

* 46% more oil volume to the crankshaft and connecting rod bearing

* 15-25 degree cooler engine temperatures

* 15-30 degree cooler oil temperatures

* 10-30 more PSI of oil pressure

* Reduces wet sumping, blow by and oily air cleaners

* Magnets in oil pump to help protect gears and pressure relief valve

NOTE: FEULING test results show a 50% reduction of engine sump oil level.

Tech Tips:-

* Gear drive cams require Block-off Plate part # FE-8016

* Replaces OEM # 62400264

*“On Line Shopping Only

The post Feuling HP+ Oil System. Fits Touring 2017up with Water Cooled Engine & Touring 2024up appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Developed due to billet lifter cuffs being found to cause debris and harmonics due to rubbing on the lifter flats.

* Increased clearances for larger lift camshafts. Able to use with up to our 618 camshaft without modification. Factory allows up to ~0.550in. lift.

* Recommended to be used with FEULING lifters as they fit the tightest, however other branded lifters are compatable.

* Includes ARP fasteners and wedge lock washers.

* Made in USA

Suggested Additonal Purchase:-

Tappet Cover Gaskets # JGI-25700362 or JCG-C10302

*“On Line Shopping Only

The post Feuling Lifter Cuffs. Fits Milwaukee-Eight 2017up appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Buy all of the matched parts in one kit & save $’s. Cam Chest Kit Includes:

Oil Pump/Cam Plate:-

* Will not fit FLH’24up

* Precision Machined from Billet Aluminum

* Passage Plugs Removeable for servicing

* Independant Scavenge Sections for Flywheel Cavity and Cam Chest

* Debris Screens in both scavenge pickups

* Magnet in Cam Chest to help to stop debris from entering oil pump

* Increased flow capacity on both feed (+44%) & scavenge side (+58%)

* Adjustable Pressure Relief Valve is adjustable with unit installed in engine

Pushrods:-

* Quickee Pushrods with Black pushrod tubes

Tappets:-

* S&S Precision Tappets

Tappet Cuffs:-

* Hard Anodized Black Coating

* Billet Aluminum Construction

* Stronger than Stock Material eliminates Distortion

* Improve tappet stability in high lift and high rpm situations

Cam:-

* The 496 is a 120+ HP Bolt-In Cam, When coupled with a performance intake & exhaust.

Proudly Made in the USA by S&S Cycle !

*“On Line Shopping Only

The post S&S Cam Chest Kit with HPT496 Chain Drive Camshaft & Black Pushrod Covers. Fits Touring 2017up & Softail 2018up with Oil Cooled Engines appeared first on Birds Bitz Motorcycle Parts & Accessories.

S&S Cycle now has your VVT equipped bike covered with the new HPT560 cam! This bolt-in cam provides a significant boost in both horsepower and torque from as early as 2000 rpm. Torque increases are across the entire powerband, and horsepower sees a great boost on the top end. As a bolt-in cam it is compatible with stock rockers and springs as well as S&S Cycle rocker arms

* Massive Power Gains: Boost your performance with up to 24 HP increase over stock when paired with S&S Cycle intake and exhaust systems. Experience the thrill of enhanced acceleration and top-end power.

* Torque That Turns Heads: Gain up to 14 lb-ft of torque over stock for superior low-end pull and mid-range grunt, perfect for highway cruising or spirited backroad adventures.

Suggested Additional Purchase:

* Install kit # SS330-0619 Or Bearing # FE-2080 & Gasket Kit # CG-C10302

* S&S Quickee Pushrod Kit # SS930-0123 / SS930-0137

* S&S Tappet Cuffs # SS330-0655

* S&S Cam Chain Tensioner # SS330-0737

Tech Tips:-

* Check Crankshaft run-out using Feuling Tool # FE-9014.

* S&S Crankshafts are available where run-out exceeds Specification.

Proudly Made in the USA by S&S Cycle !

*“On Line Shopping Only

The post S&S HPT560 VVT Chain Drive Camshaft. Fits 121ci VVT Gen 2 Milwaukee-Eight CVO Street Glide 2023up, CVO Road Glide 2023up appeared first on Birds Bitz Motorcycle Parts & Accessories.

*“On Line Shopping Only

The post Rollies Speed Shop Cam Install Kit – Black Pushrods. Fits Milwaukee-Eight 2017up appeared first on Birds Bitz Motorcycle Parts & Accessories.

*“On Line Shopping Only

The post Rollies Speed Shop Cam Install Kit. Fits Milwaukee-Eight 2017up appeared first on Birds Bitz Motorcycle Parts & Accessories.

*“On Line Shopping Only

The post Rollies Speed Shop Power Plus Cam Install Kit – Black Pushrods. Fits Softail 2018-2024 & Most Touring 2017-2024 appeared first on Birds Bitz Motorcycle Parts & Accessories.

*“On Line Shopping Only

The post Rollies Speed Shop Power Plus Cam Install Kit. Fits Softail 2018-2024 & Most Touring 2017-2024 appeared first on Birds Bitz Motorcycle Parts & Accessories.

* 2500 to 6500 RPM Range

* .600 Lift, Intake Closes at 47 ABDC

* Great for Big Inch Gen 1 or Gen 2

* 131-143 cubic inches

* Really pulls hard 2500rpm up

* Unique combination of low to mid range (intake lobe) and top end (exhaust lobe)

Tech Tips:-

* Requires high lift valve springs # SS900-0958

* Requires Lifter Cuffs # SS330-0655

*“On Line Shopping Only

The post Star Racing CAMS 600 Chain Drive Camshaft. Star Racing F47 Fighter Street/Race Cam. Fits Milwaukee-Eight 2017up appeared first on Birds Bitz Motorcycle Parts & Accessories.