* 107ci to 129ci Big Bore Kit (4.320in. Bore)

* Fits Oil Cooled Models.

* Chain Drive Cam & Forged Pistons with 11.1 Compression Ratio

* Wrinkle Black Finish with Highlighted Cylinder Fins.

* Bolt-On Kit, No Case Machining Required.

* Includes Oil Pump & Cam Plate.

* Includes Quickee Pushrods with BLACK Pushrod Tubes

* Includes S&S Premium Tappets

* Includes Tappet Cuffs

* Includes S&S HPT496 Chain Drive Cam

* Includes S&S Valve Springs

* Includes S&S Cam Chain Tensioner

Tech Tips:-

* Must Purchase S&S M8 Head Bolts # SS900-1006 or ARP Head Bolt Kit FE-3007.

* Use Care during assembly to avoid damage to Cylinder Spigots.

* Ring Gap & Piston to Cylinder Clearance should be checked.

* Rev Limit should be set at 3500 rpm for Initial Run In Period.

* Re-Calibration of Ignition Timing & Fuel Mixture is required.

People who Buy this Product also Purchase:-

* Hi-Strength Rocker Stud & Nut Kit # SS900-1013 or FE-3037.

* ARP Chrome Moly Hi-Performance Cylinder Stud Kit FE-3027.

Proudly Made in the USA by S&S Cycle !

*“On Line Shopping Only

The post S&S Power Pack – 129ci Big Bore Kit with Chain Drive HPT496 Camshaft, Highlighted Fins & Black Pushrod Tubes. Fits Milwaukee-Eight 2017-2024 with 107ci Oil Cooled Engine appeared first on Birds Bitz Motorcycle Parts & Accessories.

* 114ci or 117ci to 132ci Big Bore Kit (4.320in. Bore)

* Fits Oil Cooled Models.

* Will not fit FLH’24up

* Chain Drive Cam & Forged Pistons with 11.1 Compression Ratio

* Wrinkle Black with Highlighted Cylinder Fins.

* Bolt-On Kit — No Case Machining Required.

* Includes Oil Pump & Cam Plate.

* Includes Quickee Pushrods with Chrome Pushrod Tubes

* Includes S&S Premium Tappets

* Includes Tappet Cuffs

* Includes S&S HPT496 Chain Drive Cam

* Includes S&S Valve Springs

* Includes S&S Cam Chain Tensioner

Tech Tips:-

* Must Purchase S&S M8 Head Bolts # SS900-1006 or ARP Head Bolt Kit FE-3007.

* Use Care during assembly to avoid damage to Cylinder Spigots.

* Ring gap & Piston to Cylinder Clearance should be checked.

* Rev Limit should be set at 3500 rpm for Initial Run In Period.

* Re-Calibration of Ignition Timing & Fuel Mixture is required.

People who Buy this Product also Purchase:-

* Hi-Strength Rocker Stud & Nut Kit # SS900-1013 or FE-3037.

* ARP Chrome Moly Hi-Performance Cylinder Stud Kit FE-3027.

Proudly Made in the USA by S&S Cycle !

*“On Line Shopping Only

The post S&S Power Pack – 132ci Big Bore Kit with Chain Drive HPT496 Camshaft, Highlighted Fins & Chrome Pushrod Tubes. Fits Milwaukee-Eight 2017up with 114ci or 117ci Oil Cooled Engine appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Bolt on 40-50% more power for stock 107in., 114in. and 117in. M8 applications

* Garrett internals with Trask compressor and turbine housings

* Mandrel bent and tig welded stainless steel pipe kit (includes wastegate)

* Race inspired stainless steel heat shields

* Trask plenum with intergrated BOV

* Includes all componenets necessary for installation – 2 Bar Map Sensor, larger injectors, spark plugs, boost gauge with mount, oil feed anddrain lines with custom cam cover, all necessary hardware and gaskets.

Tech Tips:-

* Rollies & Trask recommend the turbo kit be fitted at the 1st service. It is much better to run the engine in before adding a significant increase in power.

* A Trask Vented Top cover is strongly recommended # TP-TM-2041BK

* A 55mm Alloy manifold is recommended to replace the stock plastic unit, # SS160-0241 or SS160-0276

* Requires the separate purchase of a Thundermax, part numberZ309-588, Z309-589, Z309-591 or Z309-592

* Fine tuning by a trained professional is required

* Oil and filter change required – use a good quality synthetic oil with no added colouring such as SPE-R.HDP25 (x5)

* Oil should be changed every 2,500km-3,000km

* Will not fit twin cooled models

*“On Line Shopping Only

The post Trask Performance Tornado Turbo Kit – Stainless Exhaust, Polished Billet. Fits Touring 2017-2023 and Softail 2018-2024 appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Bolt on 40-50% more power for stock 107in., 114in. and 117in. M8 applications

* Garrett internals with Trask compressor and turbine housings

* Mandrel bent and tig welded stainless steel pipe kit (includes wastegate)

* Race inspired stainless steel heat shields

* Trask plenum with intergrated BOV

* Includes all componenets necessary for installation – 2 Bar Map Sensor, larger injectors, spark plugs, boost gauge with mount, oil feed anddrain lines with custom cam cover, all necessary hardware and gaskets.

Tech Tips:-

* Rollies & Trask recommend the turbo kit be fitted at the 1st service. It is much better to run the engine in before adding a significant increase in power.

* A Trask Vented Top cover is strongly recommended # TP-TM-2041BK

* A 55mm Alloy manifold is recommended to replace the stock plastic unit, # SS160-0241 or SS160-0276

* Requires the separate purchase of a Thundermax, part numberZ309-588, Z309-589, Z309-591 or Z309-592

* Fine tuning by a trained professional is required

* Oil and filter change required – use a good quality synthetic oil with no added colouring such as SPE-R.HDP25 (x5)

* Oil should be changed every 2,500km-3,000km

* Will not fit twin cooled models

*“On Line Shopping Only

The post Trask Performance Tornado Turbo Kit – Stainless Exhaust, Black Billet. Fits Touring 2017-2023 and Softail 2018-2024 appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Bolt on 40-50% more power for stock 107in., 114in. and 117in. M8 applications

* Garrett internals with Trask compressor and turbine housings

* Mandrel bent and tig welded stainless steel pipe kit (includes wastegate)

* Race inspired stainless steel heat shields

* Trask plenum with intergrated BOV

* Includes all componenets necessary for installation – 2 Bar Map Sensor, larger injectors, spark plugs, boost gauge with mount, oil feed anddrain lines with custom cam cover, all necessary hardware and gaskets.

Tech Tips:-

* Rollies & Trask recommend the turbo kit be fitted at the 1st service. It is much better to run the engine in before adding a significant increase in power.

* A Trask Vented Top cover is strongly recommended # TP-TM-2041BK

* A 55mm Alloy manifold is recommended to replace the stock plastic unit, # SS160-0241 or SS160-0276

* Requires the separate purchase of a Thundermax, part numberZ309-588, Z309-589, Z309-591 or Z309-592

* Fine tuning by a trained professional is required

* Oil and filter change required – use a good quality synthetic oil with no added colouring such as SPE-R.HDP25 (x5)

* Oil should be changed every 2,500km-3,000km

* Will not fit twin cooled models

*“On Line Shopping Only

The post Trask Performance Tornado Turbo Kit – Black Exhaust, Black Billet. Fits Touring 2017-2023 and Softail 2018-2024 appeared first on Birds Bitz Motorcycle Parts & Accessories.

This kit includes:

* S&S 3-5/8in. bore high tensile cast iron Sidewinder cylinders

* Forged pistons with wristpin and rings

* 4-1/2in. stroke dynamically balanced S&S flywheel assembly, complete with S&S heavy duty connecting rods and mainshafts

* S&S stainless steel head bolts, base nut, S&S adjustable chromoly steel pushrods, head gaskets, base gaskets, exhaust gaskets, and an S&S heavy duty top motor mount.

* Compression is 8.5:1

Tech Tips:-

* Cases must be bored to accept 3-5/8in. bore cylinders

* Cylinder Heads must be bored to accept 3-5/8in. bore cylinders

*“On Line Shopping Only

The post S&S 93in. Sidewinder Big Bore Stroker Kit – Gloss Black. Fits Big Twin Shovel 1970-1984 appeared first on Birds Bitz Motorcycle Parts & Accessories.

Tech Tips:-

* Cases must be bored to accept 3-5/8in. bore cylinders, and a minor crankcase clearancing operation for the crankpin nut must be performed.

* 1990-1999 Models require # SS33-4148

*“On Line Shopping Only

The post S&S 96in. Sidewinder Big Bore Stroker Kit – Black. Fits Big Twin 1984-1999 appeared first on Birds Bitz Motorcycle Parts & Accessories.

* 107ci to 129ci Big Bore Kit (4.320in. Bore)

* Fits Oil Cooled Models.

* Will not fit FLH’24up

* Chain Drive Cam & Forged Pistons with 11.1 Compression Ratio

* Wrinkle Black Finish with Highlighted Cylinder Fins.

* Bolt-On Kit, No Case Machining Required.

* Includes Oil Pump & Cam Plate.

* Includes Quickee Pushrods with Chrome Pushrod Tubes

* Includes S&S Premium Tappets

* Includes Tappet Cuffs

* Includes S&S 550 Chain Drive Cam

* Includes S&S Valve Springs

* Includes S&S Cam Chain Tensioner

Tech Tips:-

* Must Purchase S&S M8 Head Bolts # SS900-1006 or ARP Head Bolt Kit FE-3007.

* Use Care during assembly to avoid damage to Cylinder Spigots.

* Ring Gap & Piston to Cylinder Clearance should be checked.

* Rev Limit should be set at 3500 rpm for Initial Run In Period.

* Re-Calibration of Ignition Timing & Fuel Mixture is required.

People who Buy this Product also Purchase:-

* Hi-Strength Rocker Stud & Nut Kit # SS900-1013 or FE-3037.

* ARP Chrome Moly Hi-Performance Cylinder Stud Kit FE-3027.

Proudly Made in the USA by S&S Cycle !

*“On Line Shopping Only

The post S&S Power Pack – 129ci Big Bore Kit with Chain Drive 550 Camshaft, Highlighted Fins & Chrome Pushrod Tubes. Fits Milwaukee-Eight 2017-2024 with 107ci Oil Cooled Engine appeared first on Birds Bitz Motorcycle Parts & Accessories.

* 107ci to 129ci Big Bore Kit (4.320in. Bore)

* Fits Oil Cooled Models.

* Will not fit FLH’24up

* Chain Drive Cam & Forged Pistons with 11.1 Compression Ratio

* Wrinkle Black Finish with Highlighted Cylinder Fins.

* Bolt-On Kit, No Case Machining Required.

* Includes Oil Pump & Cam Plate.

* Includes Quickee Pushrods with BLACK Pushrod Tubes

* Includes S&S Premium Tappets

* Includes Tappet Cuffs

* Includes S&S550 Chain Drive Cam

* Includes S&S Valve Springs

* Includes S&S Cam Chain Tensioner

Tech Tips:-

* Must Purchase S&S M8 Head Bolts # SS900-1006 or ARP Head Bolt Kit FE-3007.

* Use Care during assembly to avoid damage to Cylinder Spigots.

* Ring Gap & Piston to Cylinder Clearance should be checked.

* Rev Limit should be set at 3500 rpm for Initial Run In Period.

* Re-Calibration of Ignition Timing & Fuel Mixture is required.

People whoBuy this Product also Purchase:-

* Hi-Strength Rocker Stud & Nut Kit # SS900-1013 or FE-3037.

* ARP Chrome Moly Hi-Performance Cylinder Stud Kit FE-3027.

Proudly Made in the USA by S&S Cycle !

*“On Line Shopping Only

The post S&S Power Pack – 129ci Big Bore Kit with Chain Drive 550 Camshaft, Highlighted Fins & Black Pushrod Tubes. Fits Milwaukee-Eight 2017-2024 with 107ci Oil Cooled Engine appeared first on Birds Bitz Motorcycle Parts & Accessories.

* 4in. Bore Cylinder and piston kit. (No case machining required.)

* S&S 585 Easy Start Chain Drive Cams.

* TC3 Oil Pump & TC3 Cam Plate.

* S&S cam chain tensioners.

* Quickee Adjustable Pushrods with Chrome Covers.

* S&S Premium Tappets.

* 10.5:1 Compression with OEM Heads.

* 10.3:1 Compression with S&S Heads # SS106-3240.

Tech Tips:-

* Use Care during assembly to avoid damage to Cylinder Spigots.

* Ring gaps must be checked & Recorded by the assembling Technician.

* Piston to Cylinder Clearance must be checked by the assembling Technician & Cylinders honed with torque plates fitted if required.

* Rev Limit should be set at 2500 rpm for the first 80klm.

* Rev Limit should then be set at 3500 rpm for a further 1,500klm.

* To prevent Detonation, Over fuelling etc a Proven EFI Map is required to adjust the Factory Fuel & Timing Calibrations & bring your Engine into Equilibriumwith your new Mods.

Proudly Made in the USA by S&S Cycle !

*“On Line Shopping Only

The post S&S 110ci Power Pack Kit with 585 Chain Drive Easy Start Camshafts – Black. Fits Big Twin 2007-2017. </P><P> appeared first on Birds Bitz Motorcycle Parts & Accessories.