*“On Line Shopping Only

The post Namz Custom Cycle Products Accessory Electrical Power Connection. Fits Softail 2025up appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Easy installation

* Made in the USA!

KlockWerks Internal Part # KWS-02-0616-C

Tech Tips:-

Does NOT Fit FXDR Models

*“On Line Shopping Only

The post KLOCK WERKS Oil Cooler Guard – Chrome. Fits Softail 2018up appeared first on Birds Bitz Motorcycle Parts & Accessories.

Upgrade the oil cooler area on your Harley-Davidson® Softail with the Oil Cooler Guard, designed to add a custom touch while offering added protection. Made from the same material as our bagger vent screens, this mesh insert brings style and function to the front of your bike

* Easy installation

* Made in the USA!

KlockWerks Internal Part # KWS-01-0615-B

Tech Tips:-

Does Not Fit Models with Oil Coolers in Lowers

*“On Line Shopping Only

The post KLOCK WERKS Oil Cooler Guard – Black. Fits Most Touring 2017-2024 appeared first on Birds Bitz Motorcycle Parts & Accessories.

Upgrade the oil cooler area on your Harley-Davidson® Softail with the Oil Cooler Guard, designed to add a custom touch while offering added protection. Made from the same material as our bagger vent screens, this mesh insert brings style and function to the front of your bike

* Easy installation

* Made in the USA!

KlockWerks Internal Part # KWS-01-0615-C

Tech Tips:-

Does Not Fit Models with Oil Coolers in Lowers

*“On Line Shopping Only

The post KLOCK WERKS Oil Cooler Guard – Chrome. Fits Most Touring 2017-2024 appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Easy installation

* Made in the USA!

KlockWerks Internal Part # KWS-02-0616-B

Tech Tips:-

Does NOT Fit FXDR Models

*“On Line Shopping Only

The post KLOCK WERKS Oil Cooler Guard – Black. Fits Softail 2018up appeared first on Birds Bitz Motorcycle Parts & Accessories.

This harness provides battery power, ignition/accessory power and ground connection from the three pin Molex P&A accessory connector [325B] to accessories

connecting through a 4-pin Deutsch connector. This kit may be needed to install a UltraCool Oil Cooler, but also required to install Heated Grips, XM® Radio, Cruiser Amp & Speaker Systems, zumo GPS, Digital Oil Pressure Gauge, Garage Door Opener Kits, Heated Seats, decorative lighting or other electrical accessories.

*“On Line Shopping Only

The post UC M8 Dual Accessory Connector. Fits Touring 2017up and Softail 2018up appeared first on Birds Bitz Motorcycle Parts & Accessories.

This smooth, streamline design will keep your V-Twin running cooler on those hot summer days in stop and go traffic. The JIMS® R&D department has come up with a seriousway to drop your head temperature by as much as 100 degrees. Although this mounts in the horn location, JIMS has relocated a horn inside the fan housing. The cooling fan can be controlled manually or it can be regulated by a thermostat that monitors head temperature and activates the fan when engine temperature rises. This kit is highly recommended for performance motors to help extend engine life. Complete kit includes high powered fan, housing, thermostat, horn, hardware and all wiring, alongwith detailed instructions.

*“On Line Shopping Only

The post Jims Forceflow Head Cooler – Black. Fits Touring 2017up. appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Cold weather cover with magnets recommended below 16 degrees celsius sold to allow the engine to get to proper operating temerature in cold weather

* High strength magnets hold the cover in place

Tech Tips:-

* These fit very tight and want to grab when installing. Wipe a little WD40 or similar inside to make installation easier. The magnets will keep it in place.

*“On Line Shopping Only

The post UC Low Mount Oil Cooler Cold Weather Cover appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Cold weather cover with magnets recommended below 16 degrees celsius sold to allow the engine to get to proper operating temerature in cold weather

* High strength magnets hold the cover in place

Tech Tips:-

* These fit very tight and want to grab when installing. Wipe a little WD40 or similar inside to make installation easier. The magnets will keep it in place.

* Although these could be used for the ‘naked’ (no covers) version, the magnetswon’t stick to the aluminum heat exchanger. Additional straps (or alike) would be required to secure this cover in place.

*“On Line Shopping Only

The post UC Side Mount Oil Cooler Cold Weather Cover appeared first on Birds Bitz Motorcycle Parts & Accessories.

After filtration, the oil will by-pass the oil cooler automatically while the engine warms up to standard operating temperature. Once the bike reaches operating temperature, the Viscosity Regulated Flow (VRF) valve will automatically close the #4501’s by-pass hole, sending hot, filtered oil to the oil cooler, and delivering cool, clean oil to the engine.

Fits:

Milwaukee-Eight (M8) *Air-cooled only

Features:

* Installs between the oil filter landing and the oil filter filter

* 2x NPT ports & plugs for optional installation of sending unit or switch

* Machined from billet aluminum and anodized with a durable black finish.

*“On Line Shopping Only

The post Jagg Oil Coolers Oil Cooler Adaptor with By-pass. Fits Air Cooled Milwaukee-Eight 2018up appeared first on Birds Bitz Motorcycle Parts & Accessories.