* Dyno tuned for maximum performance.

* Swept-up muffler for enhanced ground clearance.

* Carbon fiber end cap.

* Mandrel bent stainless steel tubing.

* All TIG welds done by hand.

* High-temp SS wool and packing material.

* Fits with forward and mid controls.

* Available in ceramic black.

* Accepts stock O2 sensor, as well as aftermarket wide band (18mm) sensors.

* Simple, clean, and functional heat shields included.

* Drops weight.

Tech Tips:-

* On models fitted with OEM Forward Controls the front header should be tucked in close to the frame well clear of the brake pedal & Brake rod attachment point

* Rotate the rear header outwards (front header Inwards) so the collector of the muffler angles outwards

* Installing the muffler loosely first will help get the proper alignment

* Be conscious of not inserting the header pipes too far into the muffler – particularly on the rear

* Keep the front and rear headers & muffler loose until fitted.

* Tighten the exhaust using the Industry standard tightening sequence.

* Fit the springs last

Proudly Made in the USA!

Tech Tip:

========

This system requires keeping the oem bracket.

(If already fitted with aftermarket exhaust that removed it /

requires finding another!)

*“On Line Shopping Only

The post TWO BROTHERS RACING EXHAUST Comp-S 2-into-1 Exhaust – Black with Carbon Fiber End Cap. Fits Sportster 2014-2021 appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Designed to live up to Two Brothers’ unparalleled sound and performance.

* A race bred, classically styled pipe designed to compliment the look of your Harley perfectly, while enhancing the riding experience.

* TIG welded by hand with precision out of Two Brothers’ Santa Ana, CA based headquarters.

* Uses the decades old and race proven design of the classic reverse cone megaphone.

* Race-inspired, 100% stainless steel construction comes with welded end caps and our exclusive spiral-wound stainless steel perforated inner core for a completely new look and old-school sound.

* Comes standard with stepped headers for immediate power gain.

* Accepts stock O2 sensor, as well as aftermarket wide band (18mm) sensors.

* Fits with forward and mid controls.

Tech Tips:-

* On models fitted with OEM Forward Controls the front header should be tucked in close to the frame well clear of the brake pedal & Brake rod attachment point

* Rotate the rear header outwards (front header Inwards) so the collector of the muffler angles outwards

* Installing the muffler loosely first will help get the proper alignment

* Be conscious of not inserting the header pipes too far into the muffler – particularly on the rear

* Keep the front and rear headers & muffler loose until fitted.

* Tighten the exhaust using the Industry standard tightening sequence.

* Fit the springs last

ProudlyMade in the USA!

Tech Tip:

========

This system requires keeping the oem bracket.

(If already fitted with aftermarket exhaust that removed it /

requires finding another!)

*“On Line Shopping Only

The post TWO BROTHERS RACING EXHAUST Megaphone Gen II 2-into-1 Exhaust – Black. Fits Sportster 2014-2021 appeared first on Birds Bitz Motorcycle Parts & Accessories.

* 4in. rolled cone muffler with a 2 ¼ coiled perforated baffle for increased torque and a deep tone

* 065 stainless steel headers stepped from 1 ¾in. to 1 7/8in. to 2in. at the collector

* CNC billet aluminium endcap

* Hand tig welded from top to bottom

* Machined stainless steel header collars

* 18mm o2 bungs with 12mm adapters, allows for stock or wideband sensors

Note: SPC Brackets Mount to the OEM Muffler Plate , If the bike does not have that plate it will not fit

Proudly Made in the USA by Stainless Powered Concepts !

*“On Line Shopping Only

The post SP Concepts EXHAUST 2-into-1 Cutback Exhaust – Stainless Steel with Black End Cap. Fits Sportster 2014-2021 appeared first on Birds Bitz Motorcycle Parts & Accessories.

* 4in. rolled cone muffler with a 2 ¼ coiled perforated baffle for increased torque and a deep tone

* 065 stainless steel headers stepped from 1 ¾in. to 1 7/8in. to 2in. at the collector

* Hand tig welded from top to bottom

* Machined stainless steel header collars

* 18mm o2 bungs with 12mm adapters, allows for stock or wideband sensors

Note: SPC Brackets Mount to the OEM Muffler Plate , If the bike does not have that plate it willnot fit

Proudly Made in the USA by Stainless Powered Concepts !

*“On Line Shopping Only

The post SP Concepts EXHAUST 2-into-1 LaneSplitter Exhaust – Stainless Steel. Fits Sportster 2014-2021 appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Dyno tuned for maximum performance.

* Swept-up muffler for enhanced ground clearance.

* Carbon fiber end cap.

* Mandrel bent stainless steel tubing.

* All TIG welds done by hand.

* High-temp SS wool and packing material.

* Fits with forward and mid controls.

* Available in brush stainless steel finish

* Accepts stock O2 sensor, as well as aftermarket wide band (18mm) sensors.

* Simple, clean, and functional heat shields included.

* Drops weight.

Tech Tips:-

* On models fitted with OEM Forward Controls the front header should be tucked in close to the frame well clear of the brake pedal & Brake rod attachment point

* Rotate the rear header outwards (front header Inwards) so the collector of the muffler angles outwards

* Installing the muffler loosely first will help get the proper alignment

* Be conscious of not inserting the header pipes too far into the muffler – particularly on the rear

* Keep the front and rear headers & muffler loose until fitted.

* Tighten the exhaust using the Industry standard tightening sequence.

* Fit the springs last

Proudly Made in the USA!

Tech Tip:

========

This system requires keeping the oem bracket.

(If already fitted with aftermarket exhaust that removed it /

requires finding another!)

*“On Line Shopping Only

The post TWO BROTHERS RACING EXHAUST Comp-S 2-into-1 Exhaust – Stainless Steel with Carbon Fiber End Cap. Fits Sportster 2014-2021 appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Designed to live up to Two Brothers’ unparalleled sound and performance.

* A race bred, classically styled pipe designed to compliment the look of your Harley perfectly, while enhancing the riding experience.

* TIG welded by hand with precision out of Two Brothers’ Santa Ana, CA based headquarters.

* Uses the decades old and race proven design of the classic reverse cone megaphone.

* Race-inspired, 100% stainless steel construction comes with welded endcaps and our exclusive spiral-wound stainless steel perforated inner core for a completely new look and old-school sound.

* Comes standard with stepped headers for immediate power gain.

Tech Tips:-

* On models fitted with OEM Forward Controls the front header should be tucked in close to the frame well clear of the brake pedal & Brake rod attachment point

* Rotate the rear header outwards (front header Inwards) so the collector of the muffler angles outwards

* Installing the muffler loosely first will help get the proper alignment

* Be conscious of not inserting the header pipes too far into the muffler – particularly on the rear

* Keep the front and rear headers & muffler loose until fitted.

* Tighten the exhaust using the Industry standard tightening sequence.

* Fit the springs last

Proudly Made in the USA!

*“On Line Shopping Only

The post TWO BROTHERS RACING EXHAUST Megaphone Gen II 2-into-1 Exhaust – Stainless Steel. Fits Sportster 1986-2003. appeared first on Birds Bitz Motorcycle Parts & Accessories.

* This new El Diablo 2-into-1 is as mean as they get, designed specifically for solid mount Sportster models.

* One quick & easy way to increase horsepower on your bike is to install one of our 2-into-1 systems.

* Our new upswept 2-into-1 for solid mount Sportsters uses equal length headers, mated to a cone megaphone muffler.

* The collector is one of a kind and is placed before the foot pegs, creating the most efficient mating of the exhaust gases& in turn generating more performance.

* The rear cylinder header runs forward & wraps around the ignition cover for a sleek look.

* The short 4-inch machined aluminum tip is powder coated black, while the muffler body is stamped with the Cobra logo.

* The tip’s reverse cone shape tastefully compliments the upswept cone muffler.

* Heat shields cover the exhaust headers & the collector nestles beneath a simple chromed/or black cover.

Proudly Made in the USA by Cobra !

*“On Line Shopping Only

The post COBRA EXHAUST El Diablo 2-into-1 Exhaust – Chrome with Black End Cap. Fits Sportster 1986-2003. appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Triple stepped headers 1 .75in. to 1.875in. to 2.00in.

* Equipped with a 2 step baffle 2.5in. to 3in.

* System equals five steps throughout for extreme power gains.

* Header flows into a mini-cone to create a deep, rich and throaty sound.

* System reduces heat concentration by up to 30%.

* Full-coverage one-piece heatshields.

* Works with 12mm & 18mm O2 Sensor.

* Includes mounting hardware.

* Engineered for maximum power.

Tech Tips:-

* Quiet Baffle Available. FPE-AC00222

* Fuel Mixture Calibration is Advised.

Proudly Made in the USA by Freedom Performance !

*“On Line Shopping Only

The post FREEDOM PERFORMANCE EXHAUST Combat 2-into-1 Exhaust – Black with Black End Cap. Fits Sportster 2004-2021 appeared first on Birds Bitz Motorcycle Parts & Accessories.