With long headers designed to perfectly hug the cam chest cover and sweep upward to an oversized merge collector that feeds an exquisite reverse cone muffler, the Gaslighter 2-1 delivers an aggressive rumble that willcompliment any performance bagger build. Finished off with full length header and collector heat shields, this system packs performance punch for both Gen-1 and Gen-2 Milwaukee-Eight Touring models.

* Mid-Length Profile 2-1 System with Brushed Finish

* 304 Stainless Steel Construction

* Hand TIG Welded Collector Heat Shield & Muffler

* Direct Stamped Logo Treatment

*“On Line Shopping Only

The post Vance and Hines Gaslighter 2-into-1 Exhaust – Stainless Steel. Fits Touring 2017up appeared first on Birds Bitz Motorcycle Parts & Accessories.

* A race bred, classically styled pipe designed to compliment the look of your Harley perfectly, while enhancing the riding experience.

* TIG welded by hand with precision out of Two Brothers’ Santa Ana, CA based headquarters.

* Uses the decades old and race proven design of the classic reverse cone megaphone.

* Race-inspired, 100% stainless steel construction comes with welded end caps and our exclusive spiral wound stainless steel perforated inner core for a completely new look and old-school sound.

* Comes standard with stepped headers for immediate power gain.

* Heat shields included (not pictured on bike).

* Accepts stock O2 sensor, as well as aftermarket wide band (18mm)

Tech Tips:-

* Does not fit 240 tyre models

* Model with Saddlebags (i.e. Heritage, Sport Glide, Low Rider ST) require purchase of Saddlebag relocation bracket # TBR-005-496-SGB

Proudly Made in the USA by Two Brothers Racing !

*“On Line Shopping Only

The post TWO BROTHERS RACING EXHAUST Megaphone Gen II 2-into-1 Exhaust – Black. Fits Softail 2018up with Non-240 Rear Tyre appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Includes the new DBX baffle for a more aggressive note

* Get that Recognizable Rinehart Racing Sound and Performance for your Indian Scout.

* Suggested additional purchase: High Flow Air Cleaner # SS170-0814

Tech Tips:-

* Fuel Mixture Calibration is Advised.

Proudly Made in the USA by Rinehart Racing !

*“On Line Shopping Only

The post RINEHART EXHAUST 4.5in. DBX45 Slip-On Muffler – Chrome with Black End Cap. Fits Indian Scout 2025up appeared first on Birds Bitz Motorcycle Parts & Accessories.

* 4in. rolled cone muffler with a 2 ¼ coiled perforated baffle for increased torque and a deep tone

* 065 stainless steel headers stepped from 1 ¾in. to 1 7/8in. to 2in. at the collector

* CNC billet aluminium endcap

* Hand tig welded from top to bottom

* Machined stainless steel header collars

* 18mm o2 bungs with 12mm adapters, allows for stock or wideband sensors

* Complete hardware kit with everything you need to mount it up

Proudly Made in the USA by Stainless Powered Concepts !

*“On Line Shopping Only

The post SP Concepts EXHAUST 2-into-1 Cutback Exhaust – Black with Black End Cap. Fits Sportster 2014-2021 appeared first on Birds Bitz Motorcycle Parts & Accessories.

* 4in. rolled cone muffler with a 2 ¼ coiled perforated baffle for increased torque and a deep tone

* 065 stainless steel headers stepped from 1 ¾in. to 1 7/8in. to 2in. at the collector

* Hand tig welded from top to bottom

* Machined stainless steel header collars

* 18mm o2 bungs with 12mm adapters, allows for stock or wideband sensors

* Complete hardware kit with everything you need to mount it up

Proudly Made in the USA byStainless Powered Concepts !

*“On Line Shopping Only

The post SP Concepts EXHAUST 2-into-1 LaneSplitter Exhaust – Black. Fits Sportster 2014-2021 appeared first on Birds Bitz Motorcycle Parts & Accessories.

* 4in. rolled cone muffler with a 2 ¼ coiled perforated baffle for increased torque and a deep tone

* 065 stainless steel headers stepped from 1 ¾in. to 1 7/8in. to 2in. at the collector

* Hand tig welded from top to bottom

* Machined stainless steel header collars

* 18mm o2 bungs with 12mm adapters, allows for stock or wideband sensors

* Complete hardware kit with everything you need to mount it up

Tech Tips:-

*FLHC, FLSB, FXLRST or any M8 Softail model running HD accessory saddlebags, require the purchase of a Saddlebag relocation bracket SPC-050-SG-B

*For fitment to 2025up FXLRST, the saddlebag bracket must be fitted to the rear peg location. If using rear pegs fit them over the saddlebag bracket.

* Will Not Fit 240 Rear Tyre Models (FXBR,FLFB,FXDR)

Proudly Made in the USA by Stainless Powered Concepts !

*“On Line Shopping Only

The post SP Concepts EXHAUST 2-into-1 LaneSplitter Exhaust – Black. Fits Softail 2018up Non-240 Rear Tyre Models. appeared first on Birds Bitz Motorcycle Parts & Accessories.

* 4.5in. high flow performance rolled cone muffler with stepped baffle from 2 ¼ to 2 ½ inches. Increases bottom to mid-range torque and horsepower on all motors. Tuned properly can accommodate 88in. to 143in..

* 065 stainless steel headers stepped from 1 ¾in. to 1 7/8in. to 2in. at the collector

* Hand tig welded from top to bottom

* Machined stainless steel header collars

* 18mm o2 bungs with 12mm adapters, allows for stock or wideband sensors

* Complete hardware kit with everything you need to mount it up

Tech Tips:-

*FLHC, FLSB, FXLRST or any M8 Softail model running HD accessory saddlebags, require the purchase of a Saddlebag relocation bracket SPC-050-SG-B

*For fitment to 2025up FXLRST, the saddlebag bracket must be fitted to the rear peg location. If using rear pegs fit them over the saddlebag bracket.

* Will Not Fit 240 Rear Tyre Models (FXBR,FLFB,FXDR)

Proudly Made in the USA by Stainless Powered Concepts !

*“On Line Shopping Only

The post SP Concepts EXHAUST 2-into-1 4.5in. Big Bore Exhaust – Black. Fits Softail 2018up Non-240 Rear Tyre Models. appeared first on Birds Bitz Motorcycle Parts & Accessories.

* 4in. rolled cone muffler with a 2 ¼ coiled perforated baffle for increased torque and a deep tone

* 065 stainless steel headers stepped from 1 ¾in. to 1 7/8in. to 2in. at the collector

* CNC billet aluminium endcap

* Hand tig welded from top to bottom

* Machined stainless steel header collars

* 18mm o2 bungs with 12mm adapters, allows for stock or wideband sensors

* Complete hardware kit with everything you need to mount it up

Tech Tips:-

*FLHC, FLSB, FXLRST or any M8 Softail model running HD accessory saddlebags, require the purchase of a Saddlebag relocation bracket SPC-050-SG-B

*For fitment to 2025up FXLRST, the saddlebag bracket must be fitted to the rear peg location. If using rear pegs fit them over the saddlebag bracket.

* Will Not Fit 240 Rear Tyre Models (FXBR,FLFB,FXDR)

Proudly Made in the USA by Stainless Powered Concepts !

*“On Line Shopping Only

The post SP Concepts EXHAUST 2-into-1 Cutback Exhaust – Black with Black End Cap. Fits Softail 2018up Non-240 Rear Tyre Models. appeared first on Birds Bitz Motorcycle Parts & Accessories.

* 4.5in. high flow performance rolled cone muffler with stepped baffle from 2 ¼ to 2 ½ inches. Increases bottom to mid-range torque and horsepower on all motors. Tuned properly can accommodate 88in. to 143in..

* 065 stainless steel headers stepped from 1 ¾in. to 1 7/8in. to 2in. at the collector

* Hand tig welded from top to bottom

* Machined stainless steel header collars

* 18mm o2 bungs with 12mm adapters, allows for stock or wideband sensors

* Complete hardware kit with everything you need to mount it up

Proudly Made in the USA by Stainless Powered Concepts !

*“On Line Shopping Only

The post SP Concepts EXHAUST 2-into-1 4.5in. Big Bore Exhaust – Black. Fits Dyna 1999-2005 appeared first on Birds Bitz Motorcycle Parts & Accessories.

* 4in. rolled cone muffler with a 2 ¼ coiled perforated baffle for increased torque and a deep tone

* 065 stainless steel headers stepped from 1 ¾in. to 1 7/8in. to 2in. at the collector

* CNC billet aluminium endcap

* Hand tig welded from top to bottom

* Machined stainless steel header collars

* 18mm o2 bungs with 12mm adapters, allows for stock or wideband sensors

* Complete hardware kit with everything you need to mount it up

Proudly Made in the USA by Stainless Powered Concepts !

*“On Line Shopping Only

The post SP Concepts EXHAUST 2-into-1 Cutback Exhaust – Black with Black End Cap. Fits Dyna 1999-2005 appeared first on Birds Bitz Motorcycle Parts & Accessories.