* Hard-mounted riser leg and relocated rubber isolator

* Far less vibration and a much better bar feel

* Available in 1-1/8in. for moto style bars e.g. # ODI-H691CFB

* Bottom clamp has an opening to accommodate hidden wiring

* 3.5in. on center for standard OEM style Harley fitment

* Bushing life is increased and maintenance needs are lowered

* Wiring slot in the center of the riser body allows for easy installation and clean wiring

* Most Softail applications will require an extension harness # NMZ-NSXH-3201

Works well with:-

* Moto Handlebars # ODI-H691CFB Or Most 1in. Bars & KRA-UN-HB-03-B

* Perch Clamps # KRA-HD-HC-01-A

Proudly made in the USA by Kraus Motor Co.!

*“On Line Shopping Only

The post Kraus Moto 8in. Kickback x 1-1/8in. Clamp Core Isolated Riser Kit – Black. Fits Softail Street Bob, Low Rider ST, Standard & Breakout 2018-2024 appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Hard-mounted riser leg and relocated rubber isolator

* Far less vibration and a much better bar feel

* Available in 1-1/8in. for moto style bars e.g. # ODI-H691CFB

* Bottom clamp has an opening to accommodate hidden wiring

* 3.5in. on center for standard OEM style Harley fitment

* Bushing life is increased and maintenance needs are lowered

* Wiring slot in the center of the riser body allows for easy installation and clean wiring

* Most Softail applications will require an extension harness # NMZ-NSXH-3201

Works well with:-

* Moto Handlebars # ODI-H691CFB Or Most 1in. Bars & KRA-UN-HB-03-B

* Perch Clamps # KRA-HD-HC-01-A

Proudly made in the USA by Kraus Motor Co.!

*“On Line Shopping Only

The post Kraus Moto 10in. Straight x 1-1/8in. Clamp Core Isolated Riser Kit – Black. Fits Softail Street Bob, Low Rider ST, Standard & Breakout 2018-2024 appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Hard-mounted riser leg and relocated rubber isolator

* Far less vibration and a much better bar feel

* Available in 1-1/8in. for moto style bars e.g. # ODI-H691CFB

* Bottom clamp has an opening to accommodate hidden wiring

* 3.5in. on center for standard OEM style Harley fitment

* Bushing life is increased and maintenance needs are lowered

* Wiring slot in the center of the riser body allows for easy installation and clean wiring

* Most Softail applications will require an extension harness # NMZ-NSXH-3201

Works well with:-

* Moto Handlebars # ODI-H691CFB Or Most 1in. Bars & KRA-UN-HB-03-B

* Perch Clamps # KRA-HD-HC-01-A

Proudly made in the USA by Kraus Motor Co.!

*“On Line Shopping Only

The post Kraus Moto 10in. Kickback x 1-1/8in. Clamp Core Isolated Riser Kit – Black. Fits Softail Street Bob, Low Rider ST, Standard & Breakout 2018-2024 appeared first on Birds Bitz Motorcycle Parts & Accessories.

* The Big Kahuna risers will make you look and feel like the boss!

* Machined from aircraft-grade aluminum in Sunny Southern California, these race-inspired risers exude quality and comfort.

* These particular risers are of the straight variety, so keep that in mind when choosing your bars!

* The finish is anodized black, with beautiful Todd’s logos machined on the risers and the top clamps.

* 1-1/8in. Clamping Area

Proudly made in the USA by Todd’s Cycle!

*“On Line Shopping Only

The post Todds Cycle 8in. Straight Two Piece Riser Kit – Black. Fits 1-1/8in. Handlebar. appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Hard-mounted riser leg and relocated rubber isolator

* Far less vibration and a much better bar feel

* Available in 1-1/8in. for moto style bars e.g. # ODI-H691CFB

* Bottom clamp has an opening to accommodate hidden wiring

* 3.5in. on center for standard OEM style Harley fitment

* Bushing life is increased and maintenance needs are lowered

* Wiring slot in the center of the riser body allows for easy installation and clean wiring

* Most Softail applications will require an extension harness # NMZ-NSXH-3201

Works well with:-

* Moto Handlebars # ODI-H691CFB Or Most 1in. Bars & KRA-UN-HB-03-B

* Perch Clamps # KRA-HD-HC-01-A

Proudly made in the USA by Kraus Motor Co.!

*“On Line Shopping Only

The post Kraus Moto 8in. Straight x 1-1/8in. Clamp Core Isolated Riser Kit – Black. Fits Softail Street Bob, Low Rider ST, Standard & Breakout 2018-2024 appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Hard-mounted riser leg and relocated rubber isolator

* Far less vibration and a much better bar feel

* Available in 1in. for moto style bars e.g # ODI-H791MXB

* Bottom clamp has an opening to accommodate hidden wiring

* 3.5in. on center for standard OEM style Harley fitment

* Bushing life is increased and maintenance needs are lowered

* Wiring slot in the center of the riser body allows for easy installation and clean wiring

* Most Softail applications will require an extension harness # NMZ-NSXH-3201

Works well with:-

* Moto Handlebars # ODI-H791MXB

* Perch Clamps # KRA-HD-HC-01-A

Proudly made in the USA by Kraus Motor Co.!

*“On Line Shopping Only

The post Kraus Moto 8in. Straight x 1in. Clamp Core Isolated Riser Kit – Black. Fits Softail Street Bob, Low Rider ST, Standard & Breakout 2018-2024 appeared first on Birds Bitz Motorcycle Parts & Accessories.

* The Big Kahuna risers will make you look and feel like the boss!

* Machined from aircraft-grade aluminum in Sunny Southern California, these race-inspired risers exude quality and comfort.

* These particular risers are of the pullback variety, meaning they bring the bars 2-inches closer to the rider. So keep that in mind when choosing your bars!

* The finish is anodized black, with beautiful Todd’s logos machined on the risers and the top clamps.

* 1-1/8in. Clamping Area

Proudly made in the USA by Todd’s Cycle!

*“On Line Shopping Only

The post Todds Cycle 8in. Pullback Two Piece Riser Kit – Black. Fits 1-1/8in. Handlebar. appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Hard-mounted riser leg and relocated rubber isolator

* Far less vibration and a much better bar feel

* Available in 1-1/8in. for moto style bars e.g. # ODI-H691CFB

* Bottom clamp has an opening to accommodate hidden wiring

* 3.5in. on center for standard OEM style Harley fitment

* Bushing life is increased and maintenance needs are lowered

* Wiring slot in the center of the riser body allows for easy installation and clean wiring

Works well with:-

* Moto Handlebars # ODI-H691CFB Or Most 1in. Bars & KRA-UN-HB-03-B

* Perch Clamps # KRA-HD-HC-01-A

* Road Glide Gauge Bezel # KRA-ST-IN-03-A

* Lowrider S Gauge Bucket # KRA-SF-IN-14-A

* M8 Softail Digital Gauge Mount # KRA-SF-IN-03-A

* Dyna/FXR/XL Gauge Mount # KRA-UN-IN-80-B

* Plus a T-Bar Clamp # KRA-UN-IN-12-A or Isolated Riser Top Gauge Mount # KRA-UN-ISO-9010

* Add a 3in. extension for maximum adjustability # KRA-UN-IN-031-A

Proudly made in the USA by Kraus Motor Co.!

*“On Line Shopping Only

The post Kraus Moto 8in. Kickback x 1-1/8in. Clamp Isolated Riser Kit – Black. Fits 1-1/8in. Handlebar appeared first on Birds Bitz Motorcycle Parts & Accessories.

* 100% made in the USA from American materials in Utah

* Angled kickback of the risers bring the bars 2in. closer to the rider

* Billet 6061 American Aluminum with high grade Stainless Steel fasteners offer the best in strength and weight savings

* The ridged design provides a much more solid bar feel, giving you greater confidence in your bike’s handling

* Integrated Dovetail Gauge Mount option allowsoptimal positioning of Kraus modular gauge relocation systems (Purchase # KRA-UN-IN-04-B)

* 3.5in. center to center fits standard OEM Harley fitment

* Wiring slot in the center of the riser body allows for easy installation and clean internal bar wiring

Works well with:-

* Moto Handlebars # ODI-H691CFB Or Most 1in. Bars & KRA-UN-HB-03-B

* Perch Clamps # KRA-HD-HC-01-A

Proudly made in the USA by Kraus Motor Co.!

*“On Line Shopping Only

The post Kraus Moto 9in. Kickback x 1-1/8in. Clamp Workman Riser Kit – Black. Fits 1-1/8in. Handlebar appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Hard-mounted riser leg and relocated rubber isolator

* Far less vibration and a much better bar feel

* Available in 1in. for moto style bars e.g # ODI-H791MXB

* Bottom clamp has an opening to accommodate hidden wiring

* 3.5in. on center for standard OEM style Harley fitment

* Bushing life is increased and maintenance needs are lowered

* Wiring slot in the center of the riser body allows for easy installation and clean wiring

* Most Softail applications will require an extension harness # NMZ-NSXH-3201

Works well with:-

* Moto Handlebars # ODI-H791MXB

* Perch Clamps # KRA-HD-HC-01-A

Proudly made in the USA by Kraus Motor Co.!

*“On Line Shopping Only

The post Kraus Moto 8in. Kickback x 1in. Clamp Core Isolated Riser Kit – Black. Fits Softail Street Bob, Low Rider ST, Standard & Breakout 2018-2024 appeared first on Birds Bitz Motorcycle Parts & Accessories.