The post Jims Valve Spring Compressor Adapter Tool. Use on Twin Cam 2005-2017. appeared first on Birds Bitz Motorcycle Parts & Accessories.

The post Installation Tool Installs Oil Pressure Relief Springs Twin Cam 1999-Up Made in the USA appeared first on Birds Bitz Motorcycle Parts & Accessories.

The post Timing Plug Clear Viewing Simply screw plug in by hand until it touches the flywheel, then back out 1/4 turn appeared first on Birds Bitz Motorcycle Parts & Accessories.

Requires additional purchase of one part # TR200049 (Exhaust Tubing for o2 Blocks, 2 x 5 Foot Rolls)

*“On Line Shopping Only

The post Techno Research TUNER o2 Installation Block – Sold Each (two required) appeared first on Birds Bitz Motorcycle Parts & Accessories.

If the dealer/customer already has the HD Tool # 14900008, they do not require the TR200044 kit. Instead, they require 2x TR200047, 1x TR200049 and 1x TR-F380.

Features:

* Dump the Pump – No Pump or Sampling Tube Required

* Monitor Both Cylinders Simultaneously

* Measure Exhaust Gas Correctly

* No Reversion Air giving false lean readings

* Fast, Accurate Reading with almost no delay

* Easy Installation – No Welding Required

* Canbe used with Dynamometer or Portable Data Logger

* When Done, Heat Shield covers seal screws maintains original look.

Includes:

* 2 – O2 Sampler Blocks

* Special Attachment Bolts

* Exhaust Port Jet

* 1- Hydraulic Insertion Tool (with case)

* 2 – 5-foot exhaust hoses

* 1 – Drill Bit

* 25 – Rivnuts

* 25 – Seal Screws

* 25 – Seal Washers

When combined with a set of wideband O2 sensors (such as our TRO2), the O2 installation kit allows you to get the most accurate readings so you can get the best possible results out of your tune. After the easy installation (no welding required), you can monitor both cylinders simultaneously and measure exhaust correctly with no false readings.

*“On Line Shopping Only

The post Techno Research TUNER o2 Installation Rivet Kit, with hydraulic gun appeared first on Birds Bitz Motorcycle Parts & Accessories.

25 Rivnuts, 25 screws and 25 copper washers

*“On Line Shopping Only

The post Techno Research TUNER O2 Installation Kit Refill appeared first on Birds Bitz Motorcycle Parts & Accessories.

The post Techno Research TUNER USB Cable; From Maximus to Computer appeared first on Birds Bitz Motorcycle Parts & Accessories.

The post Jims Ultimate Clutch Adjuster Tool. Use on Big Twin 1985up. appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Features a hardened ball-bearing at the valve head end to eliminate damage to valves

* Comes with new valve collar receiver for safer tool usage

* Made in the USA!

Tech Tips:-

* 2005-2017 Require Adapter Part Number: JM-988

* 2017up(M8) Require Adapter Part Number: JM-5808

*“On Line Shopping Only

The post Jims Valve Spring Compressor Tool. Use on all 1948-2004 appeared first on Birds Bitz Motorcycle Parts & Accessories.

* Removes & installs the 25mm H-D bearing.

* Removes ABS or non ABS Wheel Bearings on most of 2008up Wheels. * This tool must be used with the earlier JIMS wheel bearing Installer & Remover Tool # JM-1042.

Proudly Made in the USA by JIMS !

*“On Line Shopping Only

The post Jims Replacement 25mm Wheel Bearing Remover & Installer Tool. Fits Jims Wheel Bearing Tool # JM-1042. appeared first on Birds Bitz Motorcycle Parts & Accessories.