$52.00
Available on back-order
Used with all BDL belt drives both open style and closed primary style without Ball Bearing
clutch
* 2-9/16in. overall length & dark zinc plated – inc’s 2 o-rings
Tech Tips:-
UPDATED DESIGN
* Fits all 1990up open belt drive kits with BDL’s BPP-100 Pressue Plate
* Note: you must install the new dual O-Ring adjuster screw from the backside of the pressure plate, so as not to damage O-Rings. The O-Rings now seal mainshaft internally from oil transfer into clutch.
* Lubricate O-Rings with O-Ring lube or transmission oil!
CLUTCH HUB NUT NOTE:
The use of RED Thread Locker is required! Hub nut is LEFT HAND Thread! Torque to 70-80ft/lbs
*“On Line Shopping Only
| Brands |
|---|
